Air source heat pumps (ASHP) are electric appliances that provide heating and cooling by moving heat into a building (for heating) or out of a building (for cooling). Heat pumps do not create heat like electric resistance heating or fossil fuel-fired heating systems; instead, they transfer heat from one place to another. ASHPs use the outdoor air as a source of heat, while ground source (or geothermal) heat pumps use the ground as a source of heat.

They accomplish this by using a refrigerant that absorbs heat from colder air in order to move that heat into a space with warmer air—much the same way that a refrigerator or air conditioner works except that it can move heat in both directions to provide both heating and cooling.

Since it takes far less energy to move heat than it does to create heat, ASHPs are one of the most efficient home heating systems available. There are two primary types of ASHPs, both of which are offered by HeatSmart CCL’s ASHP installer:

Ductless air source heat pumps are exactly as they sound: heat pumps that don't require that you have ductwork in your home to provide heating and air conditioning. Each ductless system includes one outdoor condenser unit connected to one (single-zone) or more (multi-zone) indoor wall, floor or ceiling air distribution units. Ductless ASHPs are often referred to as ductless mini-splits.

Ductless air source heat pumps are the most efficient air-source systems and can be installed as a primary source of heating and cooling or installed to supplement existing systems. These supplemental applications could include, for example, installing ductless units in the most frequently used rooms like family rooms or master bedrooms to displace heating or cooling from your existing system or placing ductless units in rooms or new additions that never seem to be warm or cool enough.

These systems often come with remote controls that allow you to use them for heating, cooling, dehumidification or as a ceiling fan. Because each indoor unit can be controlled individually, you can reduce your energy use even more by lowering the temperature in rooms that are not being used.

Ducted air source heat pumps have an outdoor condenser unit that is connected to a building's ductwork, which is used to distribute heating or air conditioning throughout the building. Ducted (also known as central or unitary) ASHPs are not much different from central air conditioners or furnaces, except that they provide heating and cooling in a single system. Ducted ASHPs can work with your home’s existing ductwork, though some modifications may be necessary to adapt it from being suited for a furnace to being suited for a heat pump.

Regardless of whether a system is ductless or ducted, all ASHPs will have an outdoor condenser unit (pictured below), which will be mounted on a ground platform or on the side or roof of your building (to avoid snow buildup).

Above: A ductless ASHP condenser; Below: A ducted ASHP condenser">

This outdoor condenser unit will be connected to one or more indoor air distribution units. If you’re installing a ducted ASHP, this will be a central air handler similar to one used by a furnace or central AC system. If you’re installing a ductless ASHP, this will typically be a wall-mounted unit (pictured below).

For homeowners that might not have suitable wall space or don’t like the aesthetic look of the wall-mounted indoor unit, floor-mounted and ceiling-mounted units are also available, though these units cost more to install. _{Photo courtesy of E. Armstrong}

There are many reasons why an air source heat pump could be a good fit for your home:

• Energy savings. If you heat with oil, propane, or electric resistance heat, you could save hundreds of dollars a year on your heating bill by installing an air source heat pump. No need to pay thousands of dollars to get a gas connection to your home: a cleaner alternative is already available.
• High-efficiency cooling, no ductwork required. Air source heat pumps also provide air conditioning or dehumidification and are more efficient than window units and most central air conditioning systems. Ductless ASHPs can allow you to reclaim your windows and avoid having to install ductwork to stay comfortable in the summer.
• Improved home comfort and health. In addition to providing cooling, heat pumps filter and dehumidify air, which can improve the air quality and comfort of your home. In particular, the filtration provided by ductless systems can significantly reduce allergens in your home for sensitive individuals.
• Flexible options. Heat pumps are a flexible technology that can be installed in homes of all shapes and sizes with different needs—whether you need a whole-home system replacement, have (or don’t have) ductwork, want to add zoning to your home, want to increase the efficiency of heating part of your home, or want to add extra heating/cooling to that part of your home that’s never as comfortable as it should be.
• Lower your carbon footprint. As a clean heating and cooling technology, converting from burning fossil fuels to using an air source heat pump will help reduce your carbon footprint and dependence on imported fossil fuels. Using solar PV or other renewable electricity sources can further offset emissions from the electricity powering your heat pump.
• Increased resiliency. As our climate warms, efficiently cooling even one room in a home may be a life-saver for people vulnerable to excessively high temperatures during heat waves.

Traditional ASHPs are known for their poor cold-climate performance: these systems have been primarily used in the South for decades and are optimized for a warmer climate where air conditioning needs are higher.

The ASHPs installed through HeatSmart CCL are cutting-edge cold-climate models that are optimized for New England weather. These cold climate ASHPs are certified based on their performance at 5°F and can continue providing heat even when winter air is well below zero: today’s cold climate air source heat pumps can extract heat from the air all the way down to -13°F.

Concerned about heat pump performance in January? Don't be: Mainers and Vermonters have installed the most cold-climate heat pumps out of any New England state in the past few years—over 30,000 since 2013, and both states are significantly colder than Massachusetts in the winter!

While ASHPs are a great fit for many Carlisle, Concord, and Lincoln homes and businesses, they like other heating and cooling systems are not without a few drawbacks:

• Performance in extreme cold. Since ASHPs rely on extracting heat from the outdoor air, the heating output and efficiency of ASHPs declines as outdoor air temperature declines. While the cold climate ASHPs installed through HeatSmart CCL are rated based on their performance at 5°F, for many homes, our installer will recommend keeping a backup system (your existing system or added electric baseboards) for the coldest days of the year. During some of those particularly cold days, it may make more economic sense for you to shut off your ASHP and use your backup fossil fuel system to provide heating. It’s worth noting that it’s unlikely your ASHP will stop providing heat entirely: even in the prolonged cold snap in January, the temperature (not wind chill) did not drop below -13F, which is the operational limit for today’s cold climate air-source heat pumps.
• Aesthetic considerations. ASHPs require outdoor (e.g. condenser and piping) and indoor equipment (wall-mounted units) that may be aesthetically displeasing to some homeowners. Our installer can discuss a variety of options available to you to minimize aesthetic impacts from an ASHP installation.
• Higher installed costs. ASHPs cost more upfront than fossil fuel or central AC systems. However, their higher efficiency will typically pay back the difference over the course of several years.
• Lower efficiency than GSHPs. Since the outdoor air is more variable in temperature than the ground, ASHPs are typically less efficient than geothermal heat pumps. However, ASHPs are also cheaper and quicker to install.

ASHPs can be installed in most homes. However, if you answer “Yes” to any of the questions below, a ductless or ducted ASHP could be a great fit for you:

• Do you heat with oil, propane or electric resistance?
• Is your existing heating or air conditioning system 15+ years old?
• Do you want central air conditioning but don’t have/don’t want to install ductwork?
• Do you have persistent hot or cold spots in your home?
• Do you want more control over the temperature in individual rooms in your home?
• Are you sensitive to air pollutants and allergens?
• Do you want to reduce your carbon footprint?

Air source heat pumps are considered to be “clean” heating and cooling systems because they do not create heat, but rather they move renewable heat from the ambient air from one place to another. This process is powered by electricity, which can also be sourced from renewable sources like solar, wind, or hydro.

Even though our grid is only about 12% renewable today (and getting greener year by year), an ASHP system powered by grid electricity will still reduce your greenhouse gas emissions from heating by 20-60%!

ASHPs are typically rated for heating efficiency based on their Heating Seasonal Performance Factor (HSPF) or seasonal Coefficient of Performance (COP), both of which describe the system’s efficiency over the course of the heating season. The seasonal efficiency of ASHPs can range from 220% to 300%+ (i.e. COP of 2.2 to 3.0) depending on the system type, application, and how cold it is outside. That means that for every one unit of electricity used, 2.2 to 3 units of heat are transferred into the home. By comparison, electric resistance heating has a COP of 1, and fossil fuel boilers and furnaces can be 75-95% efficient.

ASHPs also provide high-efficiency cooling—better than window AC units and comparable to the highest-efficiency central air conditioners.

Annual system maintenance, which consists of cleaning air filters and an annual maintenance checkup for the outside unit, costs about the same as annual servicing charges for a boiler or furnace. You can also clean the filters yourself, which can help to keep your system running well for many years (ask our installer for tips on how best to do this!).

Otherwise, the only other maintenance requirement would be to keep your condenser unit clear of snow during the winter, just like you would need to keep your furnace or boiler vents clear.

A heat pump installation is typically a straightforward process with minimal disruption to your home. A simple, single-zone ductless ASHP system can be completed in less than a day and only requires a single 2-3 inch hole to be cut (and later, sealed) in your wall.

If you are installing a “multi-zone” ductless system or a ducted system that requires modifications to your ductwork, your installation may take a few days or more to complete.

While most ASHP systems work right out of the box, there are a few things you may want consider to get the most out of your system:

• “Set it and forget it.” While many of us are used to turning off the lights and turning down the heat when you leave the home or go to sleep, heat pumps are most efficient when running continuously at partial output without sudden increases in heating demand from cranking the thermostat up. Think about it like how your car’s mileage improves when you drive at a constant speed instead of constantly stopping and starting. Consider only setting back your heat pump system when you’re gone for several days.
• Know when to use your backup system. Depending on the weather and the cost of your backup heating fuel, it may be more efficient to use your backup system during the coldest parts of the year when heat pumps are at their least efficient. If you expect the temperature to be in the single digits or lower for the day, consider just turning your heat pump system off and firing up your backup boiler or furnace.
• Keep your system well-maintained. A well-maintained system will keep performing at high efficiency. Remember to clean your indoor dust filters; keep the outdoor condenser free of snow, ice, and other obstructions; and consider getting regular annual servicing.
• Improve the efficiency of your home. A heat pump in a well-insulated home will perform better than a poorly-insulated home. Consider getting approved, incentivized insulation, air sealing, and weatherization upgrades through Mass Save or the Concord MLP prior to installing your heat pump. Not only will your home be even more comfortable and your system perform better, but you may need a smaller (and cheaper) system to meet your home’s needs.

A properly-functioning heat pump may occasionally blow air that feels cooler than expected, particularly relative to a furnace. There are two reasons this may occur:

• Heat pumps do not provide the same blast of very hot air that furnaces provide just due to the nature of how they generate heat: heat pumps are transferring heat from outdoors as opposed to heating air by burning fossil fuels. When it’s particularly cold outside, this air can feel cool to the touch but may still be 75-80°F or more and is working normally.
• Heat pumps occasionally run in “defrost mode” to keep the outdoor condenser clear of any frost buildup. For a few minutes your heat pump will stop producing heat, which can sometimes include a sudden, brief blast of cooler air. This is normal during winter operation and will not compromise the performance of your system.

If your heat pump is providing inadequate heat, you may consider using your backup system during temperature extremes. If your heat pump continues to blow cold air, you may have a maintenance issue with your system and should contact an installer.